PL-6000 PELA 6000 Oil Extractor
This newly designed oil changer has the power of bigger PELA's but comes in a compact more affordable model. Requires just 10 to 20 strokes to create a powerful vacuum. Sturdy, see-through container (6.0 litres) neatly captures the oil. The calibrated walls allow easy measurement of the oil extracted. A pour spout is included to help emptying. Pump is removable for easy storage. Ideal for consumer use.
Capacity: 6.0 litres (1.57 gal)
Height: 21.5" (assembled)
Diameter of Container: 9"
Tube: Probe 3/16" OD, Length 43"; Clear Section 3/8" OD, Length 39"
How to use the Pela PL-6000/2000
Pre-run engine for about 5 minutes to warm the oil and to allow the sludge to mix and suspend in the oil. Remove the dipstick. Insert the extractor tube into the dipstick pipe until it reaches the bottom of the oil pan. Firmly place the tube cap onto the container.
Attach the pump to the top of the container.
Pump 10 to 20 times to create the vacuum. Always use 2 hands. The unit will automatically extract the old oil. Continuous pumping is not required.
Remove the tube cap from the container with a twisting motion. Remove the pump. Attach the pour spout and empty gently into a container. Bring the used oil to a recycling depot.
Note: Not for use on petroleum or other flammables.